Product Description
PVC Profile ceiling panel extrusion Line / PVC wall panel production line
Main electric part supplier :
Inverter: ABB
Contactor: Schneider
Air Switch: Schneider
Relay: Omron
Temperature controller: RKC
Electric control system: PLC
2. YF240 Calibration platform
Exterior dimension: Lx W x H: 6000x1100x1000mm (adjustable)
Vacuum pump: 4x5.5KW,Water pump: 2×4KW; Origin: Made in qingdao, China
Three direction adjustment:Forward and Backward with 0.75 Kw motor,Range: ±1000mm
Up and down, left and right manually adjusted;Range: up and down: ±150mm
3. Haul-off and cutter (combined)
Haul-off speed: 0-3m/min;Motor power: 5.5KW; Caterpillar width: 210mm;
Caterpillar length: 2200mm;Pneumatic clamp;
Cutter:Motor power: 2.2KW;Scrap collecting motor power: 1.5KW;Diameter of saw: 500mm;
Cutting range: 200mm;With scrap collecting device;
Technical Parameter:
| Model |
YF180 |
YF240 |
YF600 |
YF800 |
YF1000 |
| Max.width of product(mm) |
180 |
300 |
600 |
800 |
1000 |
| Extruder mode |
SJZ51/105 |
SJZ65/132 |
SJZ80/156 |
SJZ80/156 |
SJZ92/188 |
| Extrusion capacity(kg/h) |
150 |
180 |
360 |
360 |
600 |
| Motor power(kw) |
18.5 |
37 |
55 |
55 |
110 |
| Total length(m) |
18 |
22 |
26 |
28 |
32 |
| |
|
|
|
|
|
Features Specifications:
1. Model SJSZ series conical twin screw extruder is a kind of special equipment for extruding PVC compound. With different kinds of molds and auxiliary machines, it can produce all sorts of PVC plastic pipe, profile, plate material, sheet material, bar material and granulation.
2. The conical twin screws have applied oil cooling system. Barrel is cooled by special wind cooling system.
3. The conical twin screw extruder system has applied special computer control. According to customers requirements, most reasonable structure of conical twin screw can be made so as to achieve best plasticity performance and material quality.
4. The conical twin screw is made by high precision special digital screw miller; extruding property can be highly harmonized. It has firstly introduced advanced technique of producing screw with variable pitch and depth, so that the material can be more softly sheared and cut.
5. The distribution box is specially designed, pull force bearing is fully imported, and the drive life span can be prolonged. It can bear larger extruding pressure.
6. The electrical system has mainly applied imported parts, it has multiple alarm system, and there are few problems which can be easily eliminated. The cooling system has applied special design, heat emission area is enlarged, the cooling is rapid, and temperature control tolerance can be ± 1degree.
Picture:
Your message must be between 20-3,000 characters!